ASIC Miners Released Since 2026: Full Hashrate, Power Draw and Profitability Comparison
ASIC mining hardware released in 2026 brings a wide range of SHA-256 performance, power consumption and cooling requirements. The models in Minector’s internal database are designed for Bitcoin mining, with hashrates from 442 TH/s to 1,160 TH/s and efficiency ratings from 9.45 J/TH to 17.04 J/TH.
This comparison focuses on the figures that matter most to miners: hashrate, power draw, energy efficiency, noise, and estimated Bitcoin revenue and profit. Profitability figures use the database’s BTC price of $71,417.0000 and should be treated as estimates rather than guaranteed returns.
2026 ASIC Miner Comparison
The table below presents the available technical and profitability data for all 12 devices. Daily profit is shown after the listed daily electricity cost, while monthly profit uses the exact monthly figure in Minector’s internal data.
| ASIC miner | Release date | Hashrate | Power draw | Efficiency | Noise | Daily profit | Monthly profit |
|---|---|---|---|---|---|---|---|
| Bitmain Antminer S23 Hyd 3U(1.16Ph) | 2026-01-01 | 1160.000000 TH/s | 11020 W | 9.50 J/TH | 50 dB | $21.87811779 | $656.34353357 |
| MicroBT WhatsMiner M79(920Th) | 2026-01-01 | 920.000000 TH/s | 14500 W | 15.76 J/TH | 50 dB | $10.43961066 | $313.18831973 |
| Bitdeer SealMiner A4 Ultra Hydro(886Th) | 2026-05-01 | 886.000000 TH/s | 8372 W | 9.45 J/TH | 50 dB | $16.76435548 | $502.93066443 |
| Bitmain Antminer S23e Hyd 2U(865Th) | 2026-04-01 | 865.000000 TH/s | 8650 W | 10.00 J/TH | 50 dB | $15.79528611 | $473.85858322 |
| MicroBT WhatsMiner M7DS(680Th) | 2026-03-01 | 680.000000 TH/s | 9200 W | 13.53 J/TH | 75 dB | $9.53710353 | $286.11310589 |
| Bitdeer SealMiner A4 Pro Hydro(680Th) | 2026-05-01 | 680.000000 TH/s | 7412 W | 10.90 J/TH | 50 dB | $11.68270353 | $350.48110589 |
| MicroBT WhatsMiner M7D(634Th) | 2026-03-01 | 634.000000 TH/s | 9200 W | 14.51 J/TH | 75 dB | $8.14512300 | $244.35368990 |
| MicroBT WhatsMiner M6DS++(592Th) | 2026-03-01 | 592.000000 TH/s | 9200 W | 15.54 J/TH | 75 dB | $6.87418425 | $206.22552748 |
| Bitmain Antminer S23 Hyd(580Th) | 2026-01-01 | 580.000000 TH/s | 5510 W | 9.50 J/TH | 50 dB | $10.93905889 | $328.17176678 |
| MicroBT WhatsMiner M6DS+(540Th) | 2026-03-01 | 540.000000 TH/s | 9200 W | 17.04 J/TH | 75 dB | $5.30064104 | $159.01923114 |
| Bitmain Antminer S21j XP Hyd(495Th) | 2026-03-01 | 495.000000 TH/s | 5940 W | 12.00 J/TH | 50 dB | $7.85092095 | $235.52762855 |
| Bitmain Antminer S23 Imm.(442Th) | 2026-01-01 | 442.000000 TH/s | 5304 W | 12.00 J/TH | 50 dB | $7.01031729 | $210.30951883 |
Hashrate and Efficiency Leaders
The Bitmain Antminer S23 Hyd 3U(1.16Ph) is the hashrate leader in this group at 1160.000000 TH/s. It draws 11020 W and delivers 9.50 J/TH, making it considerably more efficient than the MicroBT WhatsMiner M79(920Th), which produces 920.000000 TH/s at 14500 W and 15.76 J/TH.
For efficiency, the Bitdeer SealMiner A4 Ultra Hydro(886Th) leads the list at 9.45 J/TH. Its 8372 W power draw is lower than the 8650 W used by the Bitmain Antminer S23e Hyd 2U(865Th), even though both machines operate in a similar hashrate range.
The Bitmain Antminer S23 Hyd(580Th) also records 9.50 J/TH, with 580.000000 TH/s and 5510 W. Among the 680 TH/s models, the Bitdeer SealMiner A4 Pro Hydro(680Th) is more efficient at 10.90 J/TH and uses 7412 W, compared with 9200 W for both the MicroBT WhatsMiner M7DS(680Th) and MicroBT WhatsMiner M7D(634Th).
Profitability Analysis
According to Minector’s internal data, the highest estimated daily profit belongs to the Bitmain Antminer S23 Hyd 3U(1.16Ph) at $21.87811779. Its daily revenue is $35.10211779 and its electricity cost is $13.22400000, producing a listed monthly profit of $656.34353357.
The Bitdeer SealMiner A4 Ultra Hydro(886Th) ranks strongly despite its lower hashrate. It records $26.81075548 in daily revenue, $10.04640000 in daily electricity cost and $16.76435548 in daily profit. Its monthly profit is $502.93066443.
The Bitmain Antminer S23e Hyd 2U(865Th) produces $15.79528611 in daily profit and $473.85858322 in monthly profit. The Bitdeer SealMiner A4 Pro Hydro(680Th) has a lower hashrate but a stronger efficiency profile, with $11.68270353 in daily profit and $350.48110589 in monthly profit.
Efficiency has a clear effect on operating costs. For example, the MicroBT WhatsMiner M6DS+(540Th) draws 9200 W at 17.04 J/TH and has a listed daily electricity cost of $11.04000000. Its daily profit is $5.30064104, compared with $10.93905889 for the Bitmain Antminer S23 Hyd(580Th), which draws 5510 W and has a daily electricity cost of $6.61200000.
Home Mining or Industrial Deployment?
Best suited to industrial facilities
The highest-output models are better matched with professional mining facilities. The Bitmain Antminer S23 Hyd 3U(1.16Ph), MicroBT WhatsMiner M79(920Th), Bitdeer SealMiner A4 Ultra Hydro(886Th) and Bitmain Antminer S23e Hyd 2U(865Th) all require substantial electrical capacity and dedicated thermal management.
Hydro models also require compatible liquid-cooling infrastructure, plumbing and maintenance procedures. These requirements make them more practical for industrial sites, hosting providers or experienced operators than for a typical residential installation.
Potential options for experienced home miners
None of these machines should be assumed to be quiet or simple to install in a home. The listed noise levels are 50 dB for the Bitmain, Bitdeer and several other models, while the MicroBT WhatsMiner M7DS, M7D, M6DS++ and M6DS+ are listed at 75 dB. Even the lower noise figure can be unsuitable for living areas, while 75 dB requires serious acoustic planning.
For an experienced home operator with appropriate electrical service, the Bitmain Antminer S23 Imm.(442Th) and Bitmain Antminer S23 Hyd(580Th) are more manageable in power scale than the largest models. The S23 Imm.(442Th) draws 5304 W, while the S23 Hyd(580Th) draws 5510 W. The latter has the stronger listed profitability, but its hydro-cooling requirements must be considered.
What Miners Should Check Before Buying
- Electricity price: The listed results include the database electricity costs, but actual tariffs, demand charges and taxes can change the outcome.
- Cooling system: Hydro units need suitable liquid-cooling equipment, while immersion models need an appropriate tank and fluid system.
- Electrical capacity: Power draws ranging from 5304 W to 14500 W require more planning than standard household circuits.
- Bitcoin conditions: Network difficulty, block rewards, BTC price and pool fees can change estimated revenue and profit.
- Operating environment: Noise, heat rejection, ventilation, maintenance access and local regulations should be evaluated before deployment.
Conclusion
The 2026 ASIC lineup shows that efficiency can be as important as raw hashrate. The Bitmain Antminer S23 Hyd 3U(1.16Ph) leads this comparison for hashrate and listed profitability, while the Bitdeer SealMiner A4 Ultra Hydro(886Th) records the best efficiency at 9.45 J/TH.
For industrial operators, the largest hydro-cooled machines offer the strongest output but demand substantial infrastructure. Home miners should focus on electrical capacity, noise and cooling practicality before considering projected profit. All profitability figures are estimates based on the stated BTC price and database assumptions, not financial guarantees.
Frequently Asked Questions
Which 2026 ASIC miner has the highest hashrate?
The Bitmain Antminer S23 Hyd 3U(1.16Ph) has the highest listed hashrate at 1160.000000 TH/s. It draws 11020 W and has an efficiency rating of 9.50 J/TH.
Which miner is the most energy efficient?
The Bitdeer SealMiner A4 Ultra Hydro(886Th) has the best listed efficiency at 9.45 J/TH. The Bitmain Antminer S23 Hyd 3U(1.16Ph) and Bitmain Antminer S23 Hyd(580Th) follow at 9.50 J/TH.
Which model has the highest estimated profit?
The Bitmain Antminer S23 Hyd 3U(1.16Ph) has the highest listed daily profit at $21.87811779 and monthly profit at $656.34353357. These figures use a BTC price of $71,417.0000 and the electricity assumptions in Minector’s internal database.
Are these ASIC miners suitable for home use?
Some lower-output models may be considered by experienced home miners, but all require careful electrical and cooling planning. Noise is also important: the listed devices range from 50 dB to 75 dB, and hydro or immersion models require specialized infrastructure.
