Best GPUs for Mining YESCRYPTR32 in 2026: Hashrate and Power Efficiency Compared

Best GPUs for Mining YESCRYPTR32 in 2026: Hashrate and Power Efficiency Compared

Choosing a GPU for YESCRYPTR32 mining requires more than looking at the highest hashrate. Power draw has a direct effect on operating costs, heat output and cooling requirements, so efficiency is equally important when comparing current and older graphics cards.

This comparison uses Minector’s internal data for eight GPUs. It covers the reported YESCRYPTR32 hashrate, power draw and VRAM capacity, then ranks the cards by calculated hashrate per watt. The efficiency figures are calculated by dividing each listed hashrate by its listed power draw.

YESCRYPTR32 GPU comparison

The NVIDIA RTX 5090 delivers the highest YESCRYPTR32 hashrate in this group at 20.5000, but it also has the highest power draw at 420 W. The NVIDIA RTX 5070 Ti produces a lower hashrate of 10.8000, yet its 185 W power draw gives it the strongest efficiency result.

Hashrate-per-watt ranking

Hashrate per watt is a useful first measure of power efficiency. A higher result means the GPU produces more YESCRYPTR32 hashrate for each watt listed in the data, although it does not include electricity prices, hardware cost, pool fees or other mining-farm expenses.

Best GPUs by mining priority

Best for maximum hashrate: NVIDIA RTX 5090

The RTX 5090 is the clear hashrate leader, reaching 20.5000 on YESCRYPTR32. Its 32 GB of VRAM is also the largest capacity in this comparison, which may provide additional flexibility if algorithm or miner requirements change in the future.

The trade-off is its 420 W power draw. That makes the RTX 5090 more demanding to operate and cool than every other card listed here. It ranks fifth for calculated hashrate per watt, so it is most attractive to miners who prioritize performance per GPU rather than minimum energy use.

Best for efficiency: NVIDIA RTX 5070 Ti

The RTX 5070 Ti ranks first for calculated efficiency at 0.05838 hashrate per watt. Its 10.8000 hashrate is lower than the RTX 5090, RTX 4090 and RTX 5080, but its 185 W power draw is also the lowest among the GPUs compared.

With 16 GB of VRAM, the RTX 5070 Ti offers a balanced specification for a mining rig focused on controlling energy consumption. Its lower power requirement may also simplify cooling and power-supply planning, although the final result depends on the complete system configuration.

Best balance of hashrate and efficiency: NVIDIA RTX 5080

The RTX 5080 combines a 13.2000 YESCRYPTR32 hashrate with a 240 W power draw. It ranks second for hashrate per watt at 0.05500, placing it behind the RTX 5070 Ti for efficiency while delivering a higher absolute hashrate.

Its 16 GB of VRAM is lower than the 32 GB on the RTX 5090 and the 24 GB on the RTX 4090, but it matches the capacity of the RTX 5070 Ti, RTX 4080 Super and RTX 4080. For miners seeking a middle ground between output and energy use, the RTX 5080 is one of the stronger options in this data set.

Older high-end options: RTX 4090 and RTX 4080 series

The RTX 4090 produces 14.8000 at 320 W and has 24 GB of VRAM. Its calculated efficiency is 0.04625, below the newer RTX 5080 and RTX 5070 Ti, but it remains ahead of the AMD Radeon RX 7900 XTX and RTX 3090 Ti in this comparison.

The RTX 4080 Super reaches 10.2000 at 205 W, while the RTX 4080 reaches 9.8000 at 200 W. Their efficiency results are 0.04976 and 0.04900 respectively, meaning the Super version has the stronger result despite its slightly higher power draw.

AMD and previous-generation alternatives

The AMD Radeon RX 7900 XTX offers 24 GB of VRAM, a 9.5000 hashrate and 290 W power draw. Its calculated efficiency is 0.03276, placing it seventh in this comparison.

The RTX 3090 Ti has the lowest listed hashrate at 9.0000 and draws 340 W. Its 0.02647 hashrate-per-watt result is the lowest among these GPUs, so its suitability depends heavily on factors not included in this comparison, such as acquisition cost and local electricity pricing.

What to consider before building a YESCRYPTR32 rig

Power draw should be treated as a core selection factor, not an afterthought. The listed wattage applies to the GPU data in this comparison; a complete mining system will also use power for the motherboard, processor, storage, fans and other components.

VRAM capacity is another consideration. The RTX 5090 has 32 GB, the RTX 4090, RX 7900 XTX and RTX 3090 Ti have 24 GB, and the RTX 5080, RTX 5070 Ti, RTX 4080 Super and RTX 4080 each have 16 GB. The appropriate capacity depends on the miner software and YESCRYPTR32 requirements, so miners should verify compatibility before purchasing hardware.

Finally, hashrate-per-watt is not the same as profitability. A complete profitability estimate should account for the miner’s electricity rate, pool fees, coin price, uptime, hardware purchase price and potential changes in network conditions. Results can also vary with drivers, software settings, temperature and overclocking or undervolting.

Conclusion

The NVIDIA RTX 5090 is the best choice in this comparison for maximum YESCRYPTR32 hashrate, delivering 20.5000 with 32 GB of VRAM. However, its 420 W power draw means that it is not the most efficient option.

The NVIDIA RTX 5070 Ti leads the efficiency ranking at 0.05838 hashrate per watt, while the RTX 5080 provides the second-best efficiency at 0.05500 and a higher 13.2000 hashrate. The RTX 4080 Super and RTX 4080 are also competitive on efficiency, whereas the RX 7900 XTX and RTX 3090 Ti rank lower by this measure.

For a final purchase decision, compare the relevant GPU’s market price and expected operating costs with your own electricity rate. The figures above are a technical comparison, not a guarantee of mining income or financial performance.

Frequently Asked Questions

Which GPU has the highest YESCRYPTR32 hashrate?

The NVIDIA RTX 5090 has the highest listed YESCRYPTR32 hashrate at 20.5000. It also uses 420 W and includes 32 GB of VRAM.

Which GPU is most efficient for YESCRYPTR32 mining?

The NVIDIA RTX 5070 Ti ranks first by calculated hashrate per watt, with a result of 0.05838. Its listed hashrate is 10.8000 and its power draw is 185 W.

Does higher hashrate always mean higher profitability?

No. Higher hashrate can improve potential output, but profitability also depends on power costs, coin price, pool fees, hardware price, uptime and network conditions. A GPU with lower hashrate can be more practical if its energy efficiency is substantially better.

Which GPUs in this comparison have 24 GB or more of VRAM?

The RTX 5090 has 32 GB, while the RTX 4090, AMD Radeon RX 7900 XTX and RTX 3090 Ti each have 24 GB. The remaining GPUs in the comparison have 16 GB.